class Enumerator

A class which allows both internal and external iteration.

An Enumerator can be created by the following methods.

Most methods have two forms: a block form where the contents are evaluated for each item in the enumeration, and a non-block form which returns a new Enumerator wrapping the iteration.

enumerator = %w(one two three).each
puts enumerator.class # => Enumerator

enumerator.each_with_object("foo") do |item, obj|
  puts "#{obj}: #{item}"
end

# foo: one
# foo: two
# foo: three

enum_with_obj = enumerator.each_with_object("foo")
puts enum_with_obj.class # => Enumerator

enum_with_obj.each do |item, obj|
  puts "#{obj}: #{item}"
end

# foo: one
# foo: two
# foo: three

This allows you to chain Enumerators together. For example, you can map a list’s elements to strings containing the index and the element as a string via:

puts %w[foo bar baz].map.with_index { |w, i| "#{i}:#{w}" }
# => ["0:foo", "1:bar", "2:baz"]

External Iteration¶ ↑

An Enumerator can also be used as an external iterator. For example, Enumerator#next returns the next value of the iterator or raises StopIteration if the Enumerator is at the end.

e = [1,2,3].each   # returns an enumerator object.
puts e.next   # => 1
puts e.next   # => 2
puts e.next   # => 3
puts e.next   # raises StopIteration

next, next_values, peek, and peek_values are the only methods which use external iteration (and Array#zip(Enumerable-not-Array) which uses next internally).

These methods do not affect other internal enumeration methods, unless the underlying iteration method itself has side-effect, e.g. IO#each_line.

FrozenError will be raised if these methods are called against a frozen enumerator. Since rewind and feed also change state for external iteration, these methods may raise FrozenError too.

External iteration differs significantly from internal iteration due to using a Fiber:

The Fiber adds some overhead compared to internal enumeration.
The stacktrace will only include the stack from the Enumerator, not above.
Fiber-local variables are not inherited inside the Enumerator Fiber, which instead starts with no Fiber-local variables.
Fiber storage variables are inherited and are designed to handle Enumerator Fibers. Assigning to a Fiber storage variable only affects the current Fiber, so if you want to change state in the caller Fiber of the Enumerator Fiber, you need to use an extra indirection (e.g., use some object in the Fiber storage variable and mutate some ivar of it).

Concretely:

Thread.current[:fiber_local] = 1
Fiber[:storage_var] = 1
e = Enumerator.new do |y|
  p Thread.current[:fiber_local] # for external iteration: nil, for internal iteration: 1
  p Fiber[:storage_var] # => 1, inherited
  Fiber[:storage_var] += 1
  y << 42
end

p e.next # => 42
p Fiber[:storage_var] # => 1 (it ran in a different Fiber)

e.each { p _1 }
p Fiber[:storage_var] # => 2 (it ran in the same Fiber/"stack" as the current Fiber)

Convert External Iteration to Internal Iteration¶ ↑

You can use an external iterator to implement an internal iterator as follows:

def ext_each(e)
  while true
    begin
      vs = e.next_values
    rescue StopIteration
      return $!.result
    end
    y = yield(*vs)
    e.feed y
  end
end

o = Object.new

def o.each
  puts yield
  puts yield(1)
  puts yield(1, 2)
  3
end

# use o.each as an internal iterator directly.
puts o.each {|*x| puts x; [:b, *x] }
# => [], [:b], [1], [:b, 1], [1, 2], [:b, 1, 2], 3

# convert o.each to an external iterator for
# implementing an internal iterator.
puts ext_each(o.to_enum) {|*x| puts x; [:b, *x] }
# => [], [:b], [1], [:b, 1], [1, 2], [:b, 1, 2], 3

Public Class Methods

new(size = nil) { |yielder| ... } click to toggle source

Creates a new Enumerator object, which can be used as an Enumerable.

Iteration is defined by the given block, in which a “yielder” object, given as block parameter, can be used to yield a value by calling the yield method (aliased as <<):

fib = Enumerator.new do |y|
  a = b = 1
  loop do
    y << a
    a, b = b, a + b
  end
end

fib.take(10) # => [1, 1, 2, 3, 5, 8, 13, 21, 34, 55]

The optional parameter can be used to specify how to calculate the size in a lazy fashion (see Enumerator#size). It can either be a value or a callable object.

static VALUE
enumerator_initialize(int argc, VALUE *argv, VALUE obj)
{
    VALUE iter = rb_block_proc();
    VALUE recv = generator_init(generator_allocate(rb_cGenerator), iter);
    VALUE arg0 = rb_check_arity(argc, 0, 1) ? argv[0] : Qnil;
    VALUE size = convert_to_feasible_size_value(arg0);

    return enumerator_init(obj, recv, sym_each, 0, 0, 0, size, false);
}

produce(initial = nil) { |prev| block } → enumerator click to toggle source

Creates an infinite enumerator from any block, just called over and over. The result of the previous iteration is passed to the next one. If initial is provided, it is passed to the first iteration, and becomes the first element of the enumerator; if it is not provided, the first iteration receives nil, and its result becomes the first element of the iterator.

Raising StopIteration from the block stops an iteration.

Enumerator.produce(1, &:succ)   # => enumerator of 1, 2, 3, 4, ....

Enumerator.produce { rand(10) } # => infinite random number sequence

ancestors = Enumerator.produce(node) { |prev| node = prev.parent or raise StopIteration }
enclosing_section = ancestors.find { |n| n.type == :section }

Using ::produce together with Enumerable methods like Enumerable#detect, Enumerable#slice_after, Enumerable#take_while can provide Enumerator-based alternatives for while and until cycles:

# Find next Tuesday
require "date"
Enumerator.produce(Date.today, &:succ).detect(&:tuesday?)

# Simple lexer:
require "strscan"
scanner = StringScanner.new("7+38/6")
PATTERN = %r{\d+|[-/+*]}
Enumerator.produce { scanner.scan(PATTERN) }.slice_after { scanner.eos? }.first
# => ["7", "+", "38", "/", "6"]

static VALUE
enumerator_s_produce(int argc, VALUE *argv, VALUE klass)
{
    VALUE init, producer;

    if (!rb_block_given_p()) rb_raise(rb_eArgError, "no block given");

    if (rb_scan_args(argc, argv, "01", &init) == 0) {
        init = Qundef;
    }

    producer = producer_init(producer_allocate(rb_cEnumProducer), init, rb_block_proc());

    return rb_enumeratorize_with_size_kw(producer, sym_each, 0, 0, producer_size, RB_NO_KEYWORDS);
}

product(*enums) → enumerator click to toggle source

product(*enums) { |elts| ... } → enumerator

Generates a new enumerator object that generates a Cartesian product of given enumerable objects. This is equivalent to Enumerator::Product.new.

e = Enumerator.product(1..3, [4, 5])
e.to_a #=> [[1, 4], [1, 5], [2, 4], [2, 5], [3, 4], [3, 5]]
e.size #=> 6

When a block is given, calls the block with each N-element array generated and returns nil.

static VALUE
enumerator_s_product(int argc, VALUE *argv, VALUE klass)
{
    VALUE enums = Qnil, options = Qnil, block = Qnil;

    rb_scan_args(argc, argv, "*:&", &enums, &options, &block);

    if (!NIL_P(options) && !RHASH_EMPTY_P(options)) {
        rb_exc_raise(rb_keyword_error_new("unknown", rb_hash_keys(options)));
    }

    VALUE obj = enum_product_initialize(argc, argv, enum_product_allocate(rb_cEnumProduct));

    if (!NIL_P(block)) {
        enum_product_run(obj, block);
        return Qnil;
    }

    return obj;
}

Public Instance Methods

e + enum → enumerator click to toggle source

Returns an enumerator object generated from this enumerator and a given enumerable.

e = (1..3).each + [4, 5]
e.to_a #=> [1, 2, 3, 4, 5]

static VALUE
enumerator_plus(VALUE obj, VALUE eobj)
{
    return new_enum_chain(rb_ary_new_from_args(2, obj, eobj));
}

each { |elm| block } → obj click to toggle source

each → enum

each(*appending_args) { |elm| block } → obj

each(*appending_args) → an_enumerator

Iterates over the block according to how this Enumerator was constructed. If no block and no arguments are given, returns self.

Examples¶ ↑

"Hello, world!".scan(/\w+/)                     #=> ["Hello", "world"]
"Hello, world!".to_enum(:scan, /\w+/).to_a      #=> ["Hello", "world"]
"Hello, world!".to_enum(:scan).each(/\w+/).to_a #=> ["Hello", "world"]

obj = Object.new

def obj.each_arg(a, b=:b, *rest)
  yield a
  yield b
  yield rest
  :method_returned
end

enum = obj.to_enum :each_arg, :a, :x

enum.each.to_a                  #=> [:a, :x, []]
enum.each.equal?(enum)          #=> true
enum.each { |elm| elm }         #=> :method_returned

enum.each(:y, :z).to_a          #=> [:a, :x, [:y, :z]]
enum.each(:y, :z).equal?(enum)  #=> false
enum.each(:y, :z) { |elm| elm } #=> :method_returned

static VALUE
enumerator_each(int argc, VALUE *argv, VALUE obj)
{
    struct enumerator *e = enumerator_ptr(obj);

    if (argc > 0) {
        VALUE args = (e = enumerator_ptr(obj = rb_obj_dup(obj)))->args;
        if (args) {
#if SIZEOF_INT < SIZEOF_LONG
            /* check int range overflow */
            rb_long2int(RARRAY_LEN(args) + argc);
#endif
            args = rb_ary_dup(args);
            rb_ary_cat(args, argv, argc);
        }
        else {
            args = rb_ary_new4(argc, argv);
        }
        RB_OBJ_WRITE(obj, &e->args, args);
        e->size = Qnil;
        e->size_fn = 0;
    }
    if (!rb_block_given_p()) return obj;

    if (!lazy_precheck(e->procs)) return Qnil;

    return enumerator_block_call(obj, 0, obj);
}

each_with_index {|(*args), idx| ... } click to toggle source

each_with_index

Same as Enumerator#with_index(0), i.e. there is no starting offset.

If no block is given, a new Enumerator is returned that includes the index.

static VALUE
enumerator_each_with_index(VALUE obj)
{
    return enumerator_with_index(0, NULL, obj);
}

each_with_object(obj) {|(*args), obj| ... } click to toggle source

each_with_object(obj)

Iterates the given block for each element with an arbitrary object, obj, and returns obj

If no block is given, returns a new Enumerator.

Example¶ ↑

to_three = Enumerator.new do |y|
  3.times do |x|
    y << x
  end
end

to_three_with_string = to_three.with_object("foo")
to_three_with_string.each do |x,string|
  puts "#{string}: #{x}"
end

# => foo: 0
# => foo: 1
# => foo: 2

static VALUE
enumerator_with_object(VALUE obj, VALUE memo)
{
    RETURN_SIZED_ENUMERATOR(obj, 1, &memo, enumerator_enum_size);
    enumerator_block_call(obj, enumerator_with_object_i, memo);

    return memo;
}

Also aliased as: with_object

feed obj → nil click to toggle source

Sets the value to be returned by the next yield inside e.

If the value is not set, the yield returns nil.

This value is cleared after being yielded.

# Array#map passes the array's elements to "yield" and collects the
# results of "yield" as an array.
# Following example shows that "next" returns the passed elements and
# values passed to "feed" are collected as an array which can be
# obtained by StopIteration#result.
e = [1,2,3].map
p e.next           #=> 1
e.feed "a"
p e.next           #=> 2
e.feed "b"
p e.next           #=> 3
e.feed "c"
begin
  e.next
rescue StopIteration
  p $!.result      #=> ["a", "b", "c"]
end

o = Object.new
def o.each
  x = yield         # (2) blocks
  p x               # (5) => "foo"
  x = yield         # (6) blocks
  p x               # (8) => nil
  x = yield         # (9) blocks
  p x               # not reached w/o another e.next
end

e = o.to_enum
e.next              # (1)
e.feed "foo"        # (3)
e.next              # (4)
e.next              # (7)
                    # (10)

static VALUE
enumerator_feed(VALUE obj, VALUE v)
{
    struct enumerator *e = enumerator_ptr(obj);

    rb_check_frozen(obj);

    if (!UNDEF_P(e->feedvalue)) {
        rb_raise(rb_eTypeError, "feed value already set");
    }
    RB_OBJ_WRITE(obj, &e->feedvalue, v);

    return Qnil;
}

inspect → string click to toggle source

Creates a printable version of e.

static VALUE
enumerator_inspect(VALUE obj)
{
    return rb_exec_recursive(inspect_enumerator, obj, 0);
}

next → object click to toggle source

Returns the next object in the enumerator, and move the internal position forward. When the position reached at the end, StopIteration is raised.

Example¶ ↑

a = [1,2,3]
e = a.to_enum
p e.next   #=> 1
p e.next   #=> 2
p e.next   #=> 3
p e.next   #raises StopIteration

See class-level notes about external iterators.

static VALUE
enumerator_next(VALUE obj)
{
    VALUE vs = enumerator_next_values(obj);
    return ary2sv(vs, 0);
}

next_values → array click to toggle source

Returns the next object as an array in the enumerator, and move the internal position forward. When the position reached at the end, StopIteration is raised.

See class-level notes about external iterators.

This method can be used to distinguish yield and yield nil.

Example¶ ↑

o = Object.new
def o.each
  yield
  yield 1
  yield 1, 2
  yield nil
  yield [1, 2]
end
e = o.to_enum
p e.next_values
p e.next_values
p e.next_values
p e.next_values
p e.next_values
e = o.to_enum
p e.next
p e.next
p e.next
p e.next
p e.next

## yield args       next_values      next
#  yield            []               nil
#  yield 1          [1]              1
#  yield 1, 2       [1, 2]           [1, 2]
#  yield nil        [nil]            nil
#  yield [1, 2]     [[1, 2]]         [1, 2]

static VALUE
enumerator_next_values(VALUE obj)
{
    struct enumerator *e = enumerator_ptr(obj);
    VALUE vs;

    rb_check_frozen(obj);

    if (!UNDEF_P(e->lookahead)) {
        vs = e->lookahead;
        e->lookahead = Qundef;
        return vs;
    }

    return get_next_values(obj, e);
}

peek → object click to toggle source

Returns the next object in the enumerator, but doesn’t move the internal position forward. If the position is already at the end, StopIteration is raised.

See class-level notes about external iterators.

Example¶ ↑

a = [1,2,3]
e = a.to_enum
p e.next   #=> 1
p e.peek   #=> 2
p e.peek   #=> 2
p e.peek   #=> 2
p e.next   #=> 2
p e.next   #=> 3
p e.peek   #raises StopIteration

static VALUE
enumerator_peek(VALUE obj)
{
    VALUE vs = enumerator_peek_values(obj);
    return ary2sv(vs, 1);
}

peek_values → array click to toggle source

Returns the next object as an array, similar to Enumerator#next_values, but doesn’t move the internal position forward. If the position is already at the end, StopIteration is raised.

See class-level notes about external iterators.

Example¶ ↑

o = Object.new
def o.each
  yield
  yield 1
  yield 1, 2
end
e = o.to_enum
p e.peek_values    #=> []
e.next
p e.peek_values    #=> [1]
p e.peek_values    #=> [1]
e.next
p e.peek_values    #=> [1, 2]
e.next
p e.peek_values    # raises StopIteration

static VALUE
enumerator_peek_values_m(VALUE obj)
{
    return rb_ary_dup(enumerator_peek_values(obj));
}

rewind → e click to toggle source

Rewinds the enumeration sequence to the beginning.

If the enclosed object responds to a “rewind” method, it is called.

static VALUE
enumerator_rewind(VALUE obj)
{
    struct enumerator *e = enumerator_ptr(obj);

    rb_check_frozen(obj);

    rb_check_funcall(e->obj, id_rewind, 0, 0);

    e->fib = 0;
    e->dst = Qnil;
    e->lookahead = Qundef;
    e->feedvalue = Qundef;
    e->stop_exc = Qfalse;
    return obj;
}

size → int, Float::INFINITY or nil click to toggle source

Returns the size of the enumerator, or nil if it can’t be calculated lazily.

(1..100).to_a.permutation(4).size # => 94109400
loop.size # => Float::INFINITY
(1..100).drop_while.size # => nil

static VALUE
enumerator_size(VALUE obj)
{
    struct enumerator *e = enumerator_ptr(obj);
    int argc = 0;
    const VALUE *argv = NULL;
    VALUE size;

    if (e->procs) {
        struct generator *g = generator_ptr(e->obj);
        VALUE receiver = rb_check_funcall(g->obj, id_size, 0, 0);
        long i = 0;

        for (i = 0; i < RARRAY_LEN(e->procs); i++) {
            VALUE proc = RARRAY_AREF(e->procs, i);
            struct proc_entry *entry = proc_entry_ptr(proc);
            lazyenum_size_func *size_fn = entry->fn->size;
            if (!size_fn) {
                return Qnil;
            }
            receiver = (*size_fn)(proc, receiver);
        }
        return receiver;
    }

    if (e->size_fn) {
        return (*e->size_fn)(e->obj, e->args, obj);
    }
    if (e->args) {
        argc = (int)RARRAY_LEN(e->args);
        argv = RARRAY_CONST_PTR(e->args);
    }
    size = rb_check_funcall_kw(e->size, id_call, argc, argv, e->kw_splat);
    if (!UNDEF_P(size)) return size;
    return e->size;
}

with_index(offset = 0) {|(*args), idx| ... } click to toggle source

with_index(offset = 0)

Iterates the given block for each element with an index, which starts from offset. If no block is given, returns a new Enumerator that includes the index, starting from offset

offset: the starting index to use

static VALUE
enumerator_with_index(int argc, VALUE *argv, VALUE obj)
{
    VALUE memo;

    rb_check_arity(argc, 0, 1);
    RETURN_SIZED_ENUMERATOR(obj, argc, argv, enumerator_enum_size);
    memo = (!argc || NIL_P(memo = argv[0])) ? INT2FIX(0) : rb_to_int(memo);
    return enumerator_block_call(obj, enumerator_with_index_i, (VALUE)MEMO_NEW(memo, 0, 0));
}

with_object(obj) {|(*args), obj| ... }

with_object(obj)

Iterates the given block for each element with an arbitrary object, obj, and returns obj

If no block is given, returns a new Enumerator.

Example¶ ↑

to_three = Enumerator.new do |y|
  3.times do |x|
    y << x
  end
end

to_three_with_string = to_three.with_object("foo")
to_three_with_string.each do |x,string|
  puts "#{string}: #{x}"
end

# => foo: 0
# => foo: 1
# => foo: 2

Alias for: each_with_object