class Fiber::Scheduler

This is not an existing class, but documentation of the interface that Scheduler object should comply to in order to be used as argument to Fiber.scheduler and handle non-blocking fibers. See also the “Non-blocking fibers” section in Fiber class docs for explanations of some concepts.

Scheduler’s behavior and usage are expected to be as follows:

When the execution in the non-blocking Fiber reaches some blocking operation (like sleep, wait for a process, or a non-ready I/O), it calls some of the scheduler’s hook methods, listed below.
Scheduler somehow registers what the current fiber is waiting on, and yields control to other fibers with Fiber.yield (so the fiber would be suspended while expecting its wait to end, and other fibers in the same thread can perform)
At the end of the current thread execution, the scheduler’s method scheduler_close is called
The scheduler runs into a wait loop, checking all the blocked fibers (which it has registered on hook calls) and resuming them when the awaited resource is ready (e.g. I/O ready or sleep time elapsed).

This way concurrent execution will be achieved transparently for every individual Fiber’s code.

Scheduler implementations are provided by gems, like Async.

Hook methods are:

io_wait, io_read, io_write, io_pread, io_pwrite, and io_select, io_close
process_wait
kernel_sleep
timeout_after
address_resolve
block and unblock
(the list is expanded as Ruby developers make more methods having non-blocking calls)

When not specified otherwise, the hook implementations are mandatory: if they are not implemented, the methods trying to call hook will fail. To provide backward compatibility, in the future hooks will be optional (if they are not implemented, due to the scheduler being created for the older Ruby version, the code which needs this hook will not fail, and will just behave in a blocking fashion).

It is also strongly recommended that the scheduler implements the fiber method, which is delegated to by Fiber.schedule.

Sample toy implementation of the scheduler can be found in Ruby’s code, in test/fiber/scheduler.rb

Public Instance Methods

address_resolve(hostname) → array_of_strings or nil click to toggle source

Invoked by any method that performs a non-reverse DNS lookup. The most notable method is Addrinfo.getaddrinfo, but there are many other.

The method is expected to return an array of strings corresponding to ip addresses the hostname is resolved to, or nil if it can not be resolved.

Fairly exhaustive list of all possible call-sites:

VALUE
rb_fiber_scheduler_address_resolve(VALUE scheduler, VALUE hostname)
{
    VALUE arguments[] = {
        hostname
    };

    return rb_check_funcall(scheduler, id_address_resolve, 1, arguments);
}

block(blocker, timeout = nil) click to toggle source

Invoked by methods like Thread.join, and by Mutex, to signify that current Fiber is blocked until further notice (e.g. unblock) or until timeout has elapsed.

blocker is what we are waiting on, informational only (for debugging and logging). There are no guarantee about its value.

Expected to return boolean, specifying whether the blocking operation was successful or not.

VALUE
rb_fiber_scheduler_block(VALUE scheduler, VALUE blocker, VALUE timeout)
{
    return rb_funcall(scheduler, id_block, 2, blocker, timeout);
}

close() click to toggle source

Called when the current thread exits. The scheduler is expected to implement this method in order to allow all waiting fibers to finalize their execution.

The suggested pattern is to implement the main event loop in the close method.

VALUE
rb_fiber_scheduler_close(VALUE scheduler)
{
    VM_ASSERT(ruby_thread_has_gvl_p());

    VALUE result;

    // The reason for calling `scheduler_close` before calling `close` is for
    // legacy schedulers which implement `close` and expect the user to call
    // it. Subsequently, that method would call `Fiber.set_scheduler(nil)`
    // which should call `scheduler_close`. If it were to call `close`, it
    // would create an infinite loop.

    result = rb_check_funcall(scheduler, id_scheduler_close, 0, NULL);
    if (!UNDEF_P(result)) return result;

    result = rb_check_funcall(scheduler, id_close, 0, NULL);
    if (!UNDEF_P(result)) return result;

    return Qnil;
}

fiber(&block)

Implementation of the Fiber.schedule. The method is expected to immediately run the given block of code in a separate non-blocking fiber, and to return that Fiber.

Minimal suggested implementation is:

def fiber(&block)
  fiber = Fiber.new(blocking: false, &block)
  fiber.resume
  fiber
end

io_pread(io, buffer, from, length, offset) → read length or -errno click to toggle source

Invoked by IO::Buffer#pread. See that method for description of arguments.

VALUE
rb_fiber_scheduler_io_pread(VALUE scheduler, VALUE io, rb_off_t from, VALUE buffer, size_t length, size_t offset)
{
    VALUE arguments[] = {
        io, buffer, OFFT2NUM(from), SIZET2NUM(length), SIZET2NUM(offset)
    };

    return rb_check_funcall(scheduler, id_io_pread, 5, arguments);
}

io_pwrite(io, buffer, from, length, offset) → written length or -errno click to toggle source

Invoked by IO::Buffer#pwrite. See that method for description of arguments.

VALUE
rb_fiber_scheduler_io_pwrite(VALUE scheduler, VALUE io, rb_off_t from, VALUE buffer, size_t length, size_t offset)
{
    VALUE arguments[] = {
        io, buffer, OFFT2NUM(from), SIZET2NUM(length), SIZET2NUM(offset)
    };

    return rb_check_funcall(scheduler, id_io_pwrite, 5, arguments);
}

io_read(io, buffer, minimum_length) → read length or -errno click to toggle source

Invoked by IO#read or IO#Buffer.read to read length bytes from io into a specified buffer (see IO::Buffer).

The minimum_length argument is the “minimum length to be read”. If the IO buffer size is 8KiB, but the length is 1024 (1KiB), up to 8KiB might be read, but at least 1KiB will be. Generally, the only case where less data than length will be read is if there is an error reading the data.

Specifying a length of 0 is valid and means try reading at least once and return any available data.

Suggested implementation should try to read from io in a non-blocking manner and call io_wait if the io is not ready (which will yield control to other fibers).

See IO::Buffer for an interface available to return data.

Expected to return number of bytes read, or, in case of an error, -errno (negated number corresponding to system’s error code).

The method should be considered experimental.

VALUE
rb_fiber_scheduler_io_read(VALUE scheduler, VALUE io, VALUE buffer, size_t length, size_t offset)
{
    VALUE arguments[] = {
        io, buffer, SIZET2NUM(length), SIZET2NUM(offset)
    };

    return rb_check_funcall(scheduler, id_io_read, 4, arguments);
}

io_select(readables, writables, exceptables, timeout) click to toggle source

Invoked by IO.select to ask whether the specified descriptors are ready for specified events within the specified timeout.

Expected to return the 3-tuple of Array of IOs that are ready.

VALUE rb_fiber_scheduler_io_select(VALUE scheduler, VALUE readables, VALUE writables, VALUE exceptables, VALUE timeout)
{
    VALUE arguments[] = {
        readables, writables, exceptables, timeout
    };

    return rb_fiber_scheduler_io_selectv(scheduler, 4, arguments);
}

io_wait(io, events, timeout) click to toggle source

Invoked by IO#wait, IO#wait_readable, IO#wait_writable to ask whether the specified descriptor is ready for specified events within the specified timeout.

events is a bit mask of IO::READABLE, IO::WRITABLE, and IO::PRIORITY.

Suggested implementation should register which Fiber is waiting for which resources and immediately calling Fiber.yield to pass control to other fibers. Then, in the close method, the scheduler might dispatch all the I/O resources to fibers waiting for it.

Expected to return the subset of events that are ready immediately.

VALUE
rb_fiber_scheduler_io_wait(VALUE scheduler, VALUE io, VALUE events, VALUE timeout)
{
    return rb_funcall(scheduler, id_io_wait, 3, io, events, timeout);
}

io_write(io, buffer, minimum_length) → written length or -errno click to toggle source

Invoked by IO#write or IO::Buffer#write to write length bytes to io from from a specified buffer (see IO::Buffer).

The minimum_length argument is the “minimum length to be written”. If the IO buffer size is 8KiB, but the length specified is 1024 (1KiB), at most 8KiB will be written, but at least 1KiB will be. Generally, the only case where less data than minimum_length will be written is if there is an error writing the data.

Specifying a length of 0 is valid and means try writing at least once, as much data as possible.

Suggested implementation should try to write to io in a non-blocking manner and call io_wait if the io is not ready (which will yield control to other fibers).

See IO::Buffer for an interface available to get data from buffer efficiently.

Expected to return number of bytes written, or, in case of an error, -errno (negated number corresponding to system’s error code).

The method should be considered experimental.

VALUE
rb_fiber_scheduler_io_write(VALUE scheduler, VALUE io, VALUE buffer, size_t length, size_t offset)
{
    VALUE arguments[] = {
        io, buffer, SIZET2NUM(length), SIZET2NUM(offset)
    };

    return rb_check_funcall(scheduler, id_io_write, 4, arguments);
}

kernel_sleep(duration = nil) click to toggle source

Invoked by Kernel#sleep and Mutex#sleep and is expected to provide an implementation of sleeping in a non-blocking way. Implementation might register the current fiber in some list of “which fiber wait until what moment”, call Fiber.yield to pass control, and then in close resume the fibers whose wait period has elapsed.

VALUE
rb_fiber_scheduler_kernel_sleep(VALUE scheduler, VALUE timeout)
{
    return rb_funcall(scheduler, id_kernel_sleep, 1, timeout);
}

process_wait(pid, flags) click to toggle source

Invoked by Process::Status.wait in order to wait for a specified process. See that method description for arguments description.

Suggested minimal implementation:

Thread.new do
  Process::Status.wait(pid, flags)
end.value

This hook is optional: if it is not present in the current scheduler, Process::Status.wait will behave as a blocking method.

Expected to return a Process::Status instance.

VALUE
rb_fiber_scheduler_process_wait(VALUE scheduler, rb_pid_t pid, int flags)
{
    VALUE arguments[] = {
        PIDT2NUM(pid), RB_INT2NUM(flags)
    };

    return rb_check_funcall(scheduler, id_process_wait, 2, arguments);
}

timeout_after(duration, exception_class, *exception_arguments, &block) → result of block click to toggle source

Invoked by Timeout.timeout to execute the given block within the given duration. It can also be invoked directly by the scheduler or user code.

Attempt to limit the execution time of a given block to the given duration if possible. When a non-blocking operation causes the block‘s execution time to exceed the specified duration, that non-blocking operation should be interrupted by raising the specified exception_class constructed with the given exception_arguments.

General execution timeouts are often considered risky. This implementation will only interrupt non-blocking operations. This is by design because it’s expected that non-blocking operations can fail for a variety of unpredictable reasons, so applications should already be robust in handling these conditions and by implication timeouts.

However, as a result of this design, if the block does not invoke any non-blocking operations, it will be impossible to interrupt it. If you desire to provide predictable points for timeouts, consider adding +sleep(0)+.

If the block is executed successfully, its result will be returned.

The exception will typically be raised using Fiber#raise.

VALUE
rb_fiber_scheduler_timeout_after(VALUE scheduler, VALUE timeout, VALUE exception, VALUE message)
{
    VALUE arguments[] = {
        timeout, exception, message
    };

    return rb_check_funcall(scheduler, id_timeout_after, 3, arguments);
}

unblock(blocker, fiber) click to toggle source

Invoked to wake up Fiber previously blocked with block (for example, Mutex#lock calls block and Mutex#unlock calls unblock). The scheduler should use the fiber parameter to understand which fiber is unblocked.

blocker is what was awaited for, but it is informational only (for debugging and logging), and it is not guaranteed to be the same value as the blocker for block.

VALUE
rb_fiber_scheduler_unblock(VALUE scheduler, VALUE blocker, VALUE fiber)
{
    VM_ASSERT(rb_obj_is_fiber(fiber));

    return rb_funcall(scheduler, id_unblock, 2, blocker, fiber);
}