sha2.h

Go to the documentation of this file.

/*
 * FILE:        sha2.h
 * AUTHOR:      Aaron D. Gifford - http://www.aarongifford.com/
 *
 * Copyright (c) 2000-2001, Aaron D. Gifford
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holder nor the names of contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $OrigId: sha2.h,v 1.1 2001/11/08 00:02:01 adg Exp adg $
 * $RoughId: sha2.h,v 1.3 2002/02/24 08:14:32 knu Exp $
 * $Id$
 */
 
#ifndef __SHA2_H__
#define __SHA2_H__
 
#ifdef __cplusplus
extern "C" {
#endif
 
 
/*
 * Import u_intXX_t size_t type definitions from system headers.  You
 * may need to change this, or define these things yourself in this
 * file.
 */
#include <sys/types.h>
 
#ifdef RUBY
# ifdef HAVE_PROTOTYPES
#  undef NOPROTO
# else
#  define NOPROTO
# endif /* HAVE_PROTOTYPES */
# ifndef BYTE_ORDER
#  define LITTLE_ENDIAN 1234
#  define BIG_ENDIAN    4321
#  ifdef WORDS_BIGENDIAN
#   define BYTE_ORDER   BIG_ENDIAN
#  else
#   define BYTE_ORDER   LITTLE_ENDIAN
#  endif
# endif /* BYTE_ORDER */
# define SHA2_USE_INTTYPES_H
#else /* RUBY */
#ifdef SHA2_USE_INTTYPES_H
 
#include <inttypes.h>
 
#endif /* SHA2_USE_INTTYPES_H */
#endif /* RUBY */
 
 
/*** SHA-256/384/512 Various Length Definitions ***********************/
#define SHA256_BLOCK_LENGTH             64
#define SHA256_DIGEST_LENGTH            32
#define SHA256_DIGEST_STRING_LENGTH     (SHA256_DIGEST_LENGTH * 2 + 1)
#define SHA384_BLOCK_LENGTH             128
#define SHA384_DIGEST_LENGTH            48
#define SHA384_DIGEST_STRING_LENGTH     (SHA384_DIGEST_LENGTH * 2 + 1)
#define SHA512_BLOCK_LENGTH             128
#define SHA512_DIGEST_LENGTH            64
#define SHA512_DIGEST_STRING_LENGTH     (SHA512_DIGEST_LENGTH * 2 + 1)
 
 
/*** SHA-256/384/512 Context Structures *******************************/
/* NOTE: If your architecture does not define either u_intXX_t types or
 * uintXX_t (from inttypes.h), you may need to define things by hand
 * for your system:
 */
#ifndef SHA2_USE_INTTYPES_H
# ifdef HAVE_U_INT8_T
typedef u_int8_t uint8_t;               /* 1-byte  (8-bits)  */
typedef u_int32_t uint32_t;             /* 4-bytes (32-bits) */
typedef u_int64_t uint64_t;             /* 8-bytes (64-bits) */
# else
typedef unsigned char uint8_t;          /* 1-byte  (8-bits)  */
typedef unsigned int uint32_t;          /* 4-bytes (32-bits) */
typedef unsigned long long uint64_t;    /* 8-bytes (64-bits) */
# endif
#endif
 
/*
 * Most BSD systems already define u_intXX_t types, as does Linux.
 * Some systems, however, like Compaq's Tru64 Unix instead can use
 * uintXX_t types defined by very recent ANSI C standards and included
 * in the file:
 *
 *   #include <inttypes.h>
 *
 * If you choose to use <inttypes.h> then please define:
 *
 *   #define SHA2_USE_INTTYPES_H
 *
 * Or on the command line during compile:
 *
 *   cc -DSHA2_USE_INTTYPES_H ...
 */
typedef struct _SHA256_CTX {
        uint32_t        state[8];
        uint64_t        bitcount;
        uint8_t buffer[SHA256_BLOCK_LENGTH];
} SHA256_CTX;
typedef struct _SHA512_CTX {
        uint64_t        state[8];
        uint64_t        bitcount[2];
        uint8_t buffer[SHA512_BLOCK_LENGTH];
} SHA512_CTX;
 
typedef SHA512_CTX SHA384_CTX;
 
 
/*** SHA-256/384/512 Function Prototypes ******************************/
#ifdef RUBY
#define SHA256_Init             rb_Digest_SHA256_Init
#define SHA256_Update           rb_Digest_SHA256_Update
#define SHA256_Finish           rb_Digest_SHA256_Finish
#define SHA256_Data             rb_Digest_SHA256_Data
#define SHA256_End              rb_Digest_SHA256_End
#define SHA256_Last             rb_Digest_SHA256_Last
#define SHA256_Transform        rb_Digest_SHA256_Transform
#define SHA256_Final(d, c)      SHA256_Finish(c, d)
 
#define SHA384_Init             rb_Digest_SHA384_Init
#define SHA384_Update           rb_Digest_SHA384_Update
#define SHA384_Finish           rb_Digest_SHA384_Finish
#define SHA384_Data             rb_Digest_SHA384_Data
#define SHA384_End              rb_Digest_SHA384_End
#define SHA384_Last             rb_Digest_SHA384_Last
#define SHA384_Transform        rb_Digest_SHA384_Transform
#define SHA384_Final(d, c)      SHA384_Finish(c, d)
 
#define SHA512_Init             rb_Digest_SHA512_Init
#define SHA512_Update           rb_Digest_SHA512_Update
#define SHA512_Finish           rb_Digest_SHA512_Finish
#define SHA512_Data             rb_Digest_SHA512_Data
#define SHA512_End              rb_Digest_SHA512_End
#define SHA512_Last             rb_Digest_SHA512_Last
#define SHA512_Transform        rb_Digest_SHA512_Transform
#define SHA512_Final(d, c)      SHA512_Finish(c, d)
#endif /* RUBY */
 
#ifndef NOPROTO
 
int SHA256_Init(SHA256_CTX *);
void SHA256_Update(SHA256_CTX*, const uint8_t*, size_t);
int SHA256_Final(uint8_t[SHA256_DIGEST_LENGTH], SHA256_CTX*);
char* SHA256_End(SHA256_CTX*, char[SHA256_DIGEST_STRING_LENGTH]);
char* SHA256_Data(const uint8_t*, size_t, char[SHA256_DIGEST_STRING_LENGTH]);
 
int SHA384_Init(SHA384_CTX*);
void SHA384_Update(SHA384_CTX*, const uint8_t*, size_t);
int SHA384_Final(uint8_t[SHA384_DIGEST_LENGTH], SHA384_CTX*);
char* SHA384_End(SHA384_CTX*, char[SHA384_DIGEST_STRING_LENGTH]);
char* SHA384_Data(const uint8_t*, size_t, char[SHA384_DIGEST_STRING_LENGTH]);
 
int SHA512_Init(SHA512_CTX*);
void SHA512_Update(SHA512_CTX*, const uint8_t*, size_t);
int SHA512_Final(uint8_t[SHA512_DIGEST_LENGTH], SHA512_CTX*);
char* SHA512_End(SHA512_CTX*, char[SHA512_DIGEST_STRING_LENGTH]);
char* SHA512_Data(const uint8_t*, size_t, char[SHA512_DIGEST_STRING_LENGTH]);
 
#else /* NOPROTO */
 
int SHA256_Init();
void SHA256_Update();
#ifdef RUBY
int SHA256_Finish();
#else
int SHA256_Final();
#endif /* RUBY */
char* SHA256_End();
char* SHA256_Data();
 
int SHA384_Init();
void SHA384_Update();
#ifdef RUBY
int SHA384_Finish();
#else
int SHA384_Final();
#endif /* RUBY */
char* SHA384_End();
char* SHA384_Data();
 
int SHA512_Init();
void SHA512_Update();
#ifdef RUBY
int SHA512_Finish();
#else
int SHA512_Final();
#endif /* RUBY */
char* SHA512_End();
char* SHA512_Data();
 
#endif /* NOPROTO */
 
#ifdef  __cplusplus
}
#endif /* __cplusplus */
 
#endif /* __SHA2_H__ */